Clip - in - tiles
Manufactured using state of the art equipment, our clip in tiles are perfectly raised, piped and stopped to
ensure secure clip engagement, in profile or spring tee, yet allows for hassle free demounting of individual
tiles. The tiles are available in square and beveled edge types and made from 0.6/0.7mm thickness
aluminum and 0.5mm thickness galvanized and coil. It is coated on a continuous paint line to give superior
finish. We have a wide range of clip in tiles in alluring colors, finishes and perforations. Our Gypsonite planks
are available in sizes 600x600mm and 600x1200mm.
Clip In Plain Tiles
Clip-in false ceiling system with GI/Aluminium tile (600 mm x 600 mm) is manufactured out of 0. 50 mm thick
regular modified polyester coated galvanized steel (z-120/180 gms total zinc coating mass of both sides, 240 mpa
yield stress). These tiles can have square or beveled edges. It is available in matt finish on the exposed side and a
primer coating on the back. Optionally, they can be coil coated on the both sides in different standard color
shades. Then the tile has 20-micron polyester coated finish and back coat of 5-micron alkyd primer. Two sides of
each tile are raised and piped and stopped to ensure positive engagement into the spring clip-in profile, yet allow
for demounting of individual tiles. The rigid suspension system consists of rows of 0. 5 mm galvanized steel clip-in
profiles of size 38 mm x 20 mm, installed at 600 mm c/c spacing to support the tiles. Suspension angles are
suspended from the roof structure by G.I. ceiling brackets. They are joined to the clip-in profiles by hold-on
clamps. The tiles / planks are held in place by pressure clips. In the flexible system the hanger and butterfly clip
replace the suspension angle. Wall angle are of size 24 mm x 24 mm and 0. 4/0.5 mm thick. They are made of coil
coated steel or aluminum matching the color of tiles. Perforation is of 2. 5 mm dia.At 5.5 mm c/c.
Clip In Perforated Tiles
Clip-in false ceiling system with steel tile (600 mm x 600 mm) is manufactured out of 0. 50 mm thick regular
modified polyester coated galvanized steel (z-120/180 gms total zinc coating mass of both sides, 240 mpa
yield stress). These tiles can have square or beveled edges. It is available in matt finish on the exposed side
and a primer coating on the back. Optionally, they can be coil coated on the both sides in different standard
color shades. Then the tile has 20-micron polyester coated finish and back coat of 5-micron alkyd primer.
Two sides of each tile are raised and piped and stopped to ensure positive engagement into the spring clip-in
profile, yet allow for demounting of individual tiles. The rigid suspension system consists of rows of 0. 5 mm
galvanized steel clip-in profiles of size 38 mm x 20 mm, installed at 600 mm c/c spacing to support the tiles.
Suspension angles are suspended from the roof structure by G.I. ceiling brackets. They are joined to the clipin profiles by hold-on clamps. The tiles / planks are held in place by pressure clips. In the flexible system the
hanger and butterfly clip replace the suspension angle. Wall angle are of size 24 mm x 24 mm and 0. 4/0.5
mm thick. They are made of coil coated steel or aluminum matching the color of tiles. Perforation is of 2. 5
Mumbai
08048070713
+918879698987
Chat with us
Chat with us
